[1] Junming Chen, Longquan Liu*, Liang Shan, Haoqiang Sheng, Dongjie Jiang, Wenjun Xu. Thermal control performance of  phase change material combined with ultra-light hollow metallic microlattice for microsatellites. Applied Thermal Engineering, doi:10.1016/j.applthermaleng.2023.120374

[2] Liu,Longquan, Xu,Wenjun. Effects of fillers on the impact damage and compressive residual properties of single hat-stiffened composite panels. Thin-Walled Structures, 2022, 180: 109705

[3] Liu Longquan, Xu Wenju. A Study on the In-Plane Shear-after-Impact Properties of CFRP Composite Laminate. Materials, 2022, 15, 5029

[4] Liu Longquan. A study of the damage tolerance of composite-metal hybrid joints reinforced by multiple and penetrative thin pins. Composites and Advanced Materials, 2022, 31:1-13.

[5] Xu Wenjun, Liu Longquan*, Xu Wu. Experiments and Finite Element Simulations of Composite Laminates Following Low Velocity On-Edge Impact Damage. Polymers 2022, 14, 1744.

[6] Xu Wenjun, Liu Longquan*, Chen Junming, Lv Xinying, YaoYongtao Yao. A hollow microlattice based ultralight active thermal control device and its fabrication techniques and thermal performances. J. Micromech. Microeng. 2022, 32: 015010

[7] Chen Junming, Liu Longquan*, Xu Wenjun, Huang Xiaobin, Sheng Haoqiang. Design and Analysis of a Hollow Metallic Microlattice Active Cooling System for Microsatellites. Nanomaterials 2022, 12, 1485.

[8]  J. Chen; X. Huang; Y. He; L. Liu; H. Sheng; W. Hu; Z. Zhao; J. He. Synergistic effect of polyphosphazene nanotubes and graphene on enhancing ablative resistance of ethylene propylene diene monomer insulation composites. J Appl Polym Sci. 2022;e52834

[9] Zhang Xiaojing, Weng Hangjian, Liu Longquan. Effect of dislocation and layer height on the compression performance of tandem honeycombs. Journal of Sandwich Structures and Materials, 2022, 24(2) :928–949

[10] Bao Haisheng, Liu Longquan*. Fabrication and Characterization of Graphene-Enhanced Hollow Microlattice Materials. J. Shanghai Jiao Tong Univ. (Sci.), 2021, 26(4): 1-5.

[11] Junming Chen, Jinxuan He, Longquan Liu, Yongzhu He. Effect of hybrid cross-linked polyphosphazene microspheres on ablative and mechanical properties of ethylene propylene diene monomer. J Appl Polym Sci. 2021;138:e51348

[12] Z. W. Guan; A. S. Al-Husainy; Q. Y. Wang; S. W. Jones; C. Su; and L. Q. Liu. Numerical Modeling of Recycled and Normal Aggregate CFRP-Strengthened Concrete-Filled Steel Columns Subjected to Lateral Impact. J. Compos. Constr., 2020, 24(5): 04020048

[13] Shi J.H., Liu L.Q.*,  Creating hollow microlattice materials reinforced by carbon nanotubes for improved mechanical properties. Materials Letters,  2019, 240: 205–208

[14] Liu L.Q.,  Feng H.,  Tang H.Q.,  Guan Z.W. Impact resistance of Nomex honeycomb sandwich structures with thin fibre reinforced polymer facesheets. Journal of Sandwich Structures & Materials,  Journal of Sandwich Structures and Materials 2018, 20(5): 531–552

[15] Tang H.Q., Liu L.Q.* A novel metal-composite joint and its structural performance. Composite Structures, 2018:26(15): 33-41

[16] Nassier A. Nassira, R.S. Bircha, W.J. Cantwell, Q.Y. Wang, L.Q. Liu, Z.W. Guan. The perforation resistance of glass fibre reinforced PEKK composites. Polymer Testing2018, 72: 423–431

[17] Feng H.,  Liu L.Q. *,  Zhao Q . Experimental and numerical investigation of the effect of entrapped air on the mechanical response of Nomex honeycomb under flatwise compression[J]. Composite Structures,  2017, 182:617-627.

[18] Liu L.Q., Zhang J.Q.,  Chen K.K.,  Wang H., Liu M.H., Experimental and numerical analysis of the mechanical behavior of liquid shim in composite-to-titanium bolted joints,  Aerospace Science and Technology,  2016,  49: 167-172.

[19] Liu L.Q., Wang H., Guan Z.W., Experimental and numerical study on the mechanical response of Nomex honeycomb core under transverse loading, Composite Structures, 2015, 121: 304-314.

[20] Liu L.Q., Meng P., Wang H., Guan Z. W., The flatwise compressive properties of Nomex honeycomb core with debonding imperfections in the double cell wall, Composites Part B-Engineering, 2015, 76: 122-132.

[21] Liu L.Q.,  Zhang J.Q.,  Wang H.,  Guan Z.W.,  Mechanical behavior of the composite curved laminates in practical applications,  Steel and Composite Structures,  2015,  19(5): 1095-1113.

[22] Liu L.Q., Zhang J.Q., Chen K.K., Wang H., Combined and interactive effects of interference fit and preloads on composite joints, Chinese Journal of Aeronautics, 2014, 27(3): 716-729.

[23] Liu L.Q., The influence of the substrate's stiffness on the liquid shim effect in composite-to-titanium hybrid bolted joints, Proceedings of the Institution of Mechanical Engineers - Part G: Journal of Aerospace Engineering, 2014, 228(3): 470-479.

[24] Liu L.Q., Zhang J.Q., Chen K.K., Wang H., Influences of assembly parameters on the strength of bolted composite-metal joints under tensile loading, Advanced Composite Materials, 2013, 22(5): 339-359

[25] Liu L.Q.*, K.Chen. Global–local finite element stress analysis of thick laminate multi-bolt joints in large-scale structures. Finite Elements in Analysis and Design, 2013, 75: 31-37.

[26] Liu L.Q.*, K.Chen. Modeling Method for Deformation Analysis in Thick Laminate Mechanical Joints. Journal of Aircraft, 2012, 49(6):1974-1981.